Nippys Trove Fishbot

Here’s Nippys Trove Fishbot. The previous Trove Fishbot we put up, no longer works and has been abandoned by the author, so here’s one to replace it. It doesn’t look as fancy, but it still does what needs to be done, and will work for hours on end, fishing for you. It includes all the source code, so you can peruse and learn to your heart’s content.

Remember any questions or comments in regards to Nippys Trove Fishbot, or if you would just like to say thanks, comment below. Also, please Like and Share (see right) if you appreciate Nippys Trove Fishbot.

How to use Nippys Trove Fishbot

Nippys Trove Fishbot hotkeys are as follows:

NumberPad1 Start and Stop Single client.
This key will start the Auto Fish for the client in the foreground. The client must be in the foreground for this to work. If the client is already fishing it will reset the counters for that client.

NumerPad3 Stop Single client
This will stop the foremost active window client.

CTRL+NumberPad1 This will start all trove.exe clients at once.
With this hotkey will start every client open at once. Make sure you pointing at what ever liquid type you are fishing. If the cleints are already fishing. It will reset all counters for that client.

CTRL+NumberPad3 Mass Stop of all clients
This will stop all clients from fishing. They will not finish there last cast sorry.

NumberPad* Reload command
If for what ever reason you need to reload the bot. Just use this hotkey. Do not hold this key. If you do it will open alot of the same clients.

NumberPad2 Enable and Disable Anti-AFK on Single client.
Bring the client you wish to toggle this on and off to the foreground and just hit the button. It will say on and off on the gui.

Nippys Trove Fishbot FAQ

How to use the GUI Controls for Nippys Trove Fishbot? How to start/stop Single client? etc…

  • To Start Single Client. Select the Client from the list. Hit Start/Restart Selected Client
  • To Stop Single Client. Select the Client from the list. Hit Stop Selected Client
  • To Start All Clients. Just the Start/Restart All Clients Button.
  • To Stop All Clients. Just hit the Stop All Clients button.
  • To wipe out all Client Data hit the Wipe all clients Data. This will remove them from the list and the active scan will pick them back up as if the client was just started.
  • To bring the client to the foreground. Just Select the Client on the list. Then hit the button Bring selected client to foreground.
  • To config the bot hit the Config button.(There is not much to config so I left this as a place holder. For when the config is needed.)
  • If you like what you see and like to help make me want to keep releasing updates hit the donate button.

If Nippys Trove Fishbot detects that is is not fishing a screen will come up with the pID. You can then just click that screen to stop that client from fishing. It will bring that window to the foreground so you know which one it is if running alot. Some times the bot might glitch and not cast so you can ignore the first one you see. But if it comes up over and over you might want to check it to resolve the issue it is having.

If you wish to fish in a new liquid type just stop Nippys Trove Fishbot on that client and then start it up again facing the new liquid type.

How to use the bootdrop/decon fuctions of Nippys Trove Fishbot

Put a loot collector under the water. Hit E while facing it to open that loot collector screen. Do not hit b to open bag otherwise the loot collect will not work. With that setup done just start Nippys Trove Fishbot up like normal.

Config Nippys Trove Fishbot GUI

In side this GUI you will see options for various things you can tweak.
Here you also can enable the boot drop. There are 3 ways to trigger the boot drop. You might not need all 3 but you can use all 3. Just tweak the settings till you get it how you like. Also there is a Ignore slot config screen. Just hit the button in the config. This will bring it up. Just check the slots you wish for it to ignore.
Notes about bootdrop. You need to be in windowed mode for this to work.

Known Issues for Nippys Trove Fishbot

Once in a while it will say unknown liquid type when fishing.
Please try starting that client again to get it to change to the liquid type.
Reason for that is that you are lagging or the lure you cast did not hit the water before it tried to read the info.
So if you see any other problem please do report them.

List of Nippys Trove Fishbot current features

  1. The bot will work with more then one client. No need to run more then one exe for each client.
  2. More efficient at scanning memory. It wont try and scan all 3 types of liquids only the type of which it started fishing in first.
  3. It checks to see if you have a lure in the water between 8 and 11 seconds or more then 45 seconds after cast. No need to wait the 40 to 45 seconds like most bots to tell the user it is not fishing.
  4. Memory scan wont start till the lure has been in the water for more then 12 seconds. This saves on cpu usage with the bot it self.
  5. Better error handling. Meaning it should not cast for no reason and waste lures.
  6. No more loops for main thread. So you can stop and start with out having to reload the fishing bot it self.
  7. Open source. Just remember to give credit where credit is due.
  8. Window title change. With info of the pID of that client and if it is fishing or not.
  9. Built in boot drop. It now has it.
  10. Various options you can now config to tweak it.
  11. Auto afk/Close client if the bot detects it stops fishing
  12. Bootdrop and Decon. With slot selection to pick which slots to ignore.
  13. Donate to Nippy, Click Here.
  14. And some other features which I am not going to list right now.

Nippys Trove Fishbot To-Do List

  1. Custom hotkeys
  2. … and what ever else you guys request or find bugs for.

Nippys Trove Fishbot

 

Download Nippys Trove Fishbot

Non-VIP Download | Guide: How to Bypass Surveys to download files

VIP Members Download (password – see below)

This content is for members only.

Nippy’s Trove Fish Bot FAQ

What is the current offset pointer?

You can either find it yourself, using the guide here – which removes your reliance on this website. Or you can share this post on Social Media, and get it for free, below.

When will you update the pointer?

We normally update within a day or two, but the update can also occur within a week of there being a patch (we also constantly update other bots/programs and each gets updated in due course).

Can I get the pointer without sharing?

Only if you find it yourself. Otherwise, sharing it just once will open the address for you, as long as you have your cookie for this website.

My Boot Drop stopped working. My bot no longer fishes. Can you help?

Just update the pointer address in config, and it will start working again.

So where is Nippy’s Trove Fish Bot fishing Pointer?

Click Share below!

13 Responses to Nippys Trove Fishbot

  1. JogaBonito says:

    Is there any other way to download this bot without those requirements to pay or download sth ?
    I have another fishing bot but I need new pointer code for it , the last code was : 0x00AF99E8
    Can you get me new one please ?

  2. Spitt says:

    Check out this link, see if it helps you. There are some pointers for it, and it might be the one you are using. However since it’s been abandoned, i am not sure it will help. Also, check the comments for more info.

  3. Spitt says:

    Updated pointer is 0x00BA9094 11/17/15

  4. JogaBonito says:

    On 1st of December is coming double speed fishing in trove so I will need new pointer for that update , please try to get me one and if it works I will donate you few dollars 🙂

  5. Spitt says:

    Edit your ini’s to look like this…

    [Nippys Fish Bot]
    Pointer=0x00B2B55C
    WaterOffset=0x144+0xe4+0x70
    LavaOffset=0x144+0xe4+0x514
    ChocoOffset=0x144+0xe4+0x2c0
    StateWaterOffset=0x144+0x4+0x4f8+0x51c
    StateChocoOffset=0x144+0x4+0x5c8+0x5ac
    StateLavaOffset=0x144+0x4+0x14+0x6f8

  6. Ssda says:

    How do i even start this thing ?

  7. Spitt says:

    You can either run the EXE (Windows) or the AHK (AutoHotKey) file. If you are running on iOS, then you will need to use the AHK file with an AHK emulator.

  8. harry says:

    it liquid type is unknown what can I do

  9. Spitt says:

    Press the NumPad5 key to be updated.

  10. Midnightman says:

    so when i try to Fish it it comes up with a voice.speak or something like that, any tips?

  11. Spitt says:

    Can you elaborate please?

  12. Spitt says:

    update 06 Jan 2017: *0x00CCE5E8*

  13. Spitt says:

    new pointer : 0x00CD3228

Leave a Reply

Your email address will not be published. Required fields are marked *

css.php
X

Forgot Password?

Join Us